The difference of Vacuum table and T-slot table for cnc router

For cnc router we have double kinds-Vacuum table and T-slot table.Many customers don't know how to choose.Let me introduce the difference of this double table now.

Vaccum table: The vacuum adsorption table is connected under the woodworking engraving machine table by a vacuum pump through a pipeline. There are multiple adsorption holes on the engraving machine table. When we put the wood board on it, the wood board is firmly adsorbed on the table by the negative pressure generated by the vacuum pump. At this time, the engraving machine starts to work. The whole loading and unloading process does not exceed more than ten seconds, with high efficiency and fast speed. It is very suitable for line carving of wooden doors and panel furniture.

T-slot table: The T slot table fix the workpiece on the table by manually tightening the screws. The profile table is a layer of aluminum profile with T-groove at the bottom and a layer of PVC material on it. If the material shape is irregular, vacuum adsorption is not easy to fix, or the processing technology is relief, hollowing, cutting and other processes, it is more suitable to select the profile fixture table. The engraving time of relief engraving itself is relatively long, and it doesn't care about a few minutes of manual splint fixation, while hollow relief cutting and other processes can't be absorbed by vacuum pump. The woodworking engraving machine of profile fixture table is suitable for relief crafts; Hollow partition, screen and other home decoration; Advertising industry PVC, acrylic, two-color board cutting and carving, etc.

If you need double table for one machine, we also could make. both vacuum table and T-slot table.more application and convenient to use.